EBL512 G3 is the powerful and flexible addressable fire alarm system for a unique early detection with four COM loops and 1012 addresses.

EBLOne, the control unit that sets a new standard in one-loop fire detection systems.

EBLWIn is the easy-to-use software for planning, commissioning and maintenance of both EBL512 G3 and EBLOne. Auto addressing as well as manual address setting available.

Addressable smoke and multi detectors with built-in short circuit isolator and true Artificial Intelligence for minimum nuisance alarms.

A wide range of state-of-the-art addressable detectors for highest security, such as smoke, heat, multi detector and multi detector with CO.

Addressable intrinsically safe detectors for fire detection in hazardous (EX) areas. Complete with barrier unit and back box for highest IP classification.

Find here both standard smoke detectors with AI solutions as well as the most comprehensive series of waterproof detectors for high temperature ranges.

A variety of accessories that makes the installation of Panasonic detectors easy, as well as protect them against condensation, low temperatures or physical damage.

Detection for special applications with flame detectors, beam detectors with industry leading optics and advanced linear heat detection with fiber optics.

Fast, cost effective and reliable addressable wireless smoke detector for buildings where it is difficult to hide cables and where extensions are required.

Wireless manual call point with up to 170 m transmission range (open air) and 6 years battery life.

Addressable base station. Highly flexible: up to 4 base stations per COM loop and up to 16 wireless units on each base station enabling up to 256 units per CIE.

The wireless LAAU eliminates unnecessary alarms to the fire brigade. Combine with wireless smoke detector for the most flexible and secure protection of apartments.

Sniffer tool for verification of the wireless installation quality during the planning, installation, and commissioning phases.

Versatile unit with a 10” colour touch screen including several innovative selectable user applications.

Metal cabinet for built-in of the display unit. Recommended for fire brigade panel applications or in public locations.

All in One Aspect Grizzle aspirating smoke detector, extremely reliable in humid and dusty environments.  Self-calibrating for the easiest configuration available. Detection classes B and C

Experience this easy-to-use PC program for the design of even the most complex aspiration systems. Multiple functions like the automatic calculation of the pipes and a materials list for convenient planning.

A complete range of accessories and specialised equipment for installations that demand extra cleaning or filtering to overcome even the most difficult conditions.

The Gateway enables the connection of your EBL fire alarm system to the outside world. You can use it for remote monitoring and control of the EBL system as well as to connect to any 3^rd party security or building management system.

The platform is developed with all your service partners in mind, and as a bonus, there will also be significant benefits for building officers and end users. The platform includes tools for planning, documenting, reporting, storage and also predictive maintenance. Our promise to you is that you will be able to save both time and money by using the EBLCloud in your daily work.

EBLApp is a powerful smartphone tool for maintenance and service with several mobile applications. It allows for true one-man testing with report generation, as well as check loop and verification of the system.

EBLGraphics creates a graphical representation of your fire alarm system. Extremely fast setup, by reuse of the commissioning file. Drawings and symbols are easily customized to fit any need. Once in place, you can interact directly in the drawings.

EBLNet is a Panasonic developed open protocol to receive data and events from the EBL system via TCP/IP, that performs operations in a security management system.

Panasonic’s addressable exit lights are fully integrated with the fire alarm system. The adaptive exit lights can dynamically change to indicate the safest evacuation route possible.

Addressable emergency lights that are fully integrated in the fire alarm system. Available with round lens for open areas and asymmetric for corridors, as well as units for outdoor and high humidity installations.

A power box provides the emergency and exit lights with power separately which makes it possible to maintain the length of the loop and still add many luminaires.

Addressable multipurpose I/O unit with built-in isolator. The unit supports auto-addressing and comes is an IP65 housing.

Addressable unit with dual monitored inputs and built-in isolator. The unit supports auto-addressing and comes is an IP65 housing.

Addressable 230 VAC relay output unit for control fire hatches and other fire protection equipment. The unit supports auto-addressing and comes is an IP66/67 housing.

Addressable 230V power supply with built-in short-circuit isolator and space for two expansion boards with voltage outputs and/or loop expander.

The unique COM-loop repeater gets a new loop with full power and distance with the greatest adaptability for the growing needs of the installation.

This unit is mounted as an expansion board inside the external power supply and provides two monitored voltage outputs (2 A each) and a special fire door closing function.

It avoids unnecessary alarms to the fire brigade. Combine with wired detectors and sounder base or wireless detectors for optimal apartment protection.

Voltage output unit with two programmable and supervised outputs, ideal for alarm devices or make use of the special fire door function.

Modular sprinkler control box for test and disablement. With IP65-rated protection and monitored input. Available in 1, 2, or 3 sprinkler zone options.

Panasonic offers a range of addressable alarm devices both visual and audible, with isolator to ensure a secure alarm always: wall and ceiling VADs and sirens as well as combined VAD and siren.

External LED indicators for wall or flush mounting. Available both addressable and conventional models. Additionally, there are programmable indicators for mounting between bases or sounder bases and detectors.

Addressable manual call point with protection against accidental operation and built-in short circuit isolator.

Addressable IP66 enclosed manual call point with protection against accidental operation and built-in short circuit isolator.

Address setting tool for a fast and easy to use address setting of all types of COM loop units.

Loop tester is useful to avoid trouble shooting in the commissioning phase. It can also be used for auto-addressing of loop units and the readouts can be combined to a complete SSD.

Software & hardware for the creation and installation of a TLON network, that connects up to 30 EBL512 G3 panels in a redundant network.